Division 10 specialties submittals
We prepare Division 10 submittal packages for specialty contractors and suppliers: toilet partitions and accessories, signage, lockers, fire extinguishers and cabinets, wall protection, and the many small items that are easy to miss but still hold up closeout.
Division 10 submittals we prepare
Specialties packages are many small items, each with its own model number, finish, mounting height and accessibility requirement. We build a clear schedule of every item, matched to the drawings and the spec, so nothing is left out.
10 21 13
Toilet compartments
Partition material, mounting style, hardware and fire or graffiti resistance, with layouts tied to the plans and accessible stall dimensions.
10 28 00
Toilet & bath accessories
Grab bars, dispensers, mirrors and hand dryers with model numbers, finishes, mounting heights and backing requirements per the accessibility code.
10 14 00
Signage
Room and code-required signs with tactile and Braille requirements, mounting locations and the sign schedule.
10 51 00
Lockers
Locker types, sizes, finishes, numbering, benches and accessible locker locations.
10 44 00
Fire extinguishers & cabinets
Extinguisher types and ratings, cabinet styles, rated cabinets in rated walls, and mounting details.
10 26 00
Wall & door protection
Corner guards, wall panels and crash rails with profiles, colors and fire performance.
10 22 00
Partitions
Operable and wire-mesh partitions with acoustic data, structural support requirements and finishes.
10 75 00
Flagpoles & other specialties
Flagpoles, display cases, postal specialties and other items, each with the data its section requires.
Section numbers follow CSI MasterFormat. Your project manual always governs: we build each package from its own Part 1 submittal requirements. Need another section? See the full CSI divisions list.
Every package we deliver includes
- Transmittal cover sheet for every package, numbered by spec section and revision
- Bookmarked, indexed PDF so reviewers can jump straight to each item
- Line-by-line spec check against Part 2 (products) and the Part 1 submittal article
- Marked-up product data: the exact model, size, options and accessories highlighted
- Deviations listed up front, never buried, with the reason for each
- RFI drafts when the drawings and specs conflict, instead of guessing
- Resubmittals that answer every reviewer comment, one by one
Why specialties submittals get sent back
- Accessories without mounting heights or clearances shown for accessible rooms
- Model numbers that do not match the accessory schedule on the drawings
- No finish samples or color selections when the architect requires them
- Fire extinguisher cabinets in rated walls submitted without a rated cabinet
- Signage without tactile and Braille details
- Backing and blocking requirements left out, causing problems for the framing trade
More on this: common reasons submittals get rejected.
How it works
01
Send the documents
Spec sections, drawings, addenda, and any products you've already bought or prefer.
02
Get a flat quote
One number per package within 48–72 hours. No subscriptions or retainers.
03
We build and check
Product selection, mark-ups and drawings, checked line by line against the spec.
04
You submit
A GC-ready PDF under your company name, plus help with any reviewer comments.
Frequently asked questions
Can you prepare all Division 10 sections as one package?
Yes, if the specification allows it. Many projects require one submittal per spec section, so we follow the project’s numbering and package rules and keep them coordinated.
Do you coordinate accessory locations with the plans?
Yes. We build an item schedule tied to the drawings, showing model, finish and mounting height for each room, so the reviewer and the installer work from the same list.
How do you price Division 10 submittals?
Per package or per spec section, as a flat number you approve before we start. Send the Division 10 spec sections and drawings and you will have a quote within 48 to 72 hours. One round of revisions for reviewer comments is included.
Do you handle the closeout documents too?
Yes. Maintenance instructions, keys and warranty information can be organized into the closeout package. See our O&M manual preparation service.
Send us your spec book. Get a flat quote in 48–72 hours.
No account, no software and no retainer. Tell us the sections you need and we price exactly that.