Glazing, storefront and curtain wall submittals
We prepare Division 08 glazing submittal packages for glazing contractors: aluminum storefront, curtain wall, windows, entrances, skylights and glass types, with the thermal, structural and test data reviewers check first.
Glazing submittals we prepare
Glazing packages tie together a framing system, a glass make-up and a set of performance requirements. We match every glass type and framing series to the specified values, so the reviewer can see U-factor, SHGC, design pressure and test results at a glance.
08 41 13
Aluminum storefront
Framing series, finishes, anchors, thermal performance and the details and elevations the spec requires, with entrance and hardware coordination.
08 44 13
Glazed curtain wall
System data, performance test reports, thermal and structural data, and the delegated-design calculations requirement identified up front.
08 51 13
Aluminum windows
Window types, performance class and grade, thermal values, installation details and the field-testing requirements.
08 80 00
Glazing
Every glass type with make-up, coatings, U-factor, SHGC, visible transmittance, safety glazing and fire-rated glass listings.
08 42 00
Entrances
Aluminum and all-glass entrances with hardware, thresholds, accessibility and operator data.
08 62 00
Skylights
Unit and framed skylights with structural, thermal and fall-protection data where required.
Samples
Finish & glass samples
Finish chips, glass samples and the mock-up submittals the spec calls for.
Closeout
Warranties
System, finish and insulating glass warranties with the specified durations.
Section numbers follow CSI MasterFormat. Your project manual always governs: we build each package from its own Part 1 submittal requirements. Need another section? See the full CSI divisions list.
Every package we deliver includes
- Transmittal cover sheet for every package, numbered by spec section and revision
- Bookmarked, indexed PDF so reviewers can jump straight to each item
- Line-by-line spec check against Part 2 (products) and the Part 1 submittal article
- Marked-up product data: the exact model, size, options and accessories highlighted
- Deviations listed up front, never buried, with the reason for each
- RFI drafts when the drawings and specs conflict, instead of guessing
- Resubmittals that answer every reviewer comment, one by one
Why glazing submittals get sent back
- Glass make-up whose U-factor or SHGC does not meet the specified values
- No test reports for air, water and structural performance of the framing system
- Delegated-design calculations missing for curtain wall anchorage or wind load
- Safety glazing or fire-rated glass locations not identified
- Finish submitted as a printed color chart instead of actual samples
- Hardware and entrances not coordinated with the door hardware schedule
More on this: common reasons submittals get rejected.
How it works
01
Send the documents
Spec sections, drawings, addenda, and any products you've already bought or prefer.
02
Get a flat quote
One number per package within 48–72 hours. No subscriptions or retainers.
03
We build and check
Product selection, mark-ups and drawings, checked line by line against the spec.
04
You submit
A GC-ready PDF under your company name, plus help with any reviewer comments.
Frequently asked questions
Do you prepare glazing shop drawings?
We prepare the product, performance and glass submittals and organize the package around the shop drawings. If you need elevations and details drafted, tell us when you request a quote and we confirm the scope and schedule.
Do you provide engineering calculations or a PE stamp?
No. We are a document preparation service. When a section makes something a delegated-design item that needs a licensed engineer’s seal, we flag it when we quote, prepare everything around it, and coordinate with the engineer you or the manufacturer engage.
How do you price glazing submittals?
Per package or per spec section, as a flat number you approve before we start. Send the Division 08 glazing sections and drawings and you will have a quote within 48 to 72 hours. One round of revisions for reviewer comments is included.
Can you include Buy America documentation for glass?
Yes. Glass is one of the construction material categories under Build America, Buy America. We gather the manufacturer certifications when your project requires them.
Send us your spec book. Get a flat quote in 48–72 hours.
No account, no software and no retainer. Tell us the sections you need and we price exactly that.